Southeast Foundation and Crawl Space Repair Before & After Photos

The team successfully lifted and leveled a customer's concrete slab using PolyLevel, a durable foam injected beneath the slab to lift, level, and stabilize it. The result was a safer, even floor with minimal disruption.

Danny contacted Southeast Foundation & Crawl Space Repair looking to have the crawl space of his home encapsulated. He had noticed they had a bad moisture problem in the home. He had an old vapor barrier and dehumidifier installed in the crawl space and still noticed moisture and possible mold growth in the crawl space. Our crew, lead by Jason Hines, installed the CleanSpace Crawl Space Encapsulation System. By installing the CleanSpace System, we were able to seal off the crawl space the earth's ground, which was the actual issue. 

Louis called Southeast Foundation and Crawl Space Repair to have someone come out and look at the crawl space of the home. Louis had a full CleanSpace Encapsulation done to his home and as a finishing touch had a custom crawl space door installed. Louis is happy with the outcome of the crawl space and the custom built door.

Louis contacted Southeast Foundation and Crawl Space Repair concerned over the high moisture level under the home. Louis previously had a vapor barrier installed by his exterminator however the problem still existed. Southeast Foundation and Crawl Space Repair inspector Randy Johnson met with Louis about the best solution for this home. It was found that the previous vapor barrier just did not seal the crawl space properly allow moisture from the ground to escape. Southeast Foundation and Crawl Space Repair installed our Clean Space Encapsulation System which included our 10 mil liner, Drainage Matting, a SaniDry CX  and a Smart Sump. Louis is happy to have his home encapsulated properly.

Myron contacted Southeast Foundation and Crawl Space Repair concerned about cracking brick underneath the car port of his home where a small storage space was located. Southeast Foundation and Crawl Space Repair owner Christopher Reeves met with Myron to go over the best solution to fix the cracking brick. Chris found that part of the car port slab that had the small storage area had started to sink, causing the area to start to crack. Our crew, led by George Herring, used our PolyLevel Injection System to raise the slab of the car port causing the bricks to come back together. Myron is extremely happy with the work and the fix to his rental home in Jacksonville, NC.